Comandos OLT Hioso

Mostra modelo, firmware, uptime e hardware.
show system-info
Mostra versão completa do software.
show software-version
Mostra placas, módulos e portas reconhecidas pela OLT.
show board-info
--- PON / GPON – Status geral Status operacional das portas GPON.
show pon status
Estatísticas detalhadas da porta GPON.
show pon statistics 1
--- ONUs — Descoberta e listagem real ONUs não provisionadas (autofind).
show gpon onu-unregistered 1
ONUs registradas e ativas.
show gpon onu-registered 1
--- ONUs — Informações completas Detalhes completos de ONU específica.
show gpon onu-info 1/3
Potência óptica RX/TX da ONU.
show gpon onu-optical 1/3
Estado das portas LAN da ONU.
show gpon onu-ports 1/3
--- Provisionamento (nativo Hioso) Adicionar ONU por serial number.
gpon onu add 1 sn 4857544355323138 profile-line 1 profile-srv 1
Alterar perfil de serviço de uma ONU.
gpon onu set 1 3 profile-srv 2
--- Remoção / Reinicialização de ONU Remover ONU da porta.
gpon onu del 1 3
Reiniciar ONU via OMCI.
gpon onu reboot 1 3
--- Configuração da porta GPON Entrar na interface GPON.
interface gpon 1
Ativar porta.
interface gpon 1 enable
Desativar porta.
interface gpon 1 disable
--- VLAN e Perfis de Serviço Criar VLAN.
vlan create 200
Adicionar porta tagged.
vlan add-port 200 ethernet 0/1 tagged
Vincular VLAN ao perfil de serviço da ONU.
gpon profile-srv 1 vlan 200
--- Ethernet / Uplink Mostrar interfaces uplink.
show interfaces
Interface específica (ex: porta 0/1).
show interface ethernet 0/1
Estatísticas detalhadas.
show interface ethernet 0/1 statistics
--- Tabela MAC (FDB)
show mac-address-table
--- Diagnóstico e testes Logs do sistema.
show log
Alarmes ativos.
show alarm
Ping a partir da OLT.
ping 8.8.8.8
Traceroute.
traceroute 1.1.1.1
--- Óptico / Transceiver Informações DDM/DOM das portas ópticas.
show interface transceiver
DDM da porta específica.
show interface ethernet 0/1 transceiver
--- Salvar e Reiniciar Salvar configurações.
save config
Reiniciar a OLT.
reboot system

Leave A Comment